E-Learning for Teachers and Trainers : Innovative Practices, Skills and Competences

Reproduction is authorised provided the source is acknowledged.Final Published versio

Effect of Modifiers on the Microstructure of Rapidly Solidified AlSi10Mg Alloy

In this work, melt-spun ribbons of AlSi10Mg added with modifiers (Er, Sr, or nano-TiB2) were produced to investigate the combined effect of modification and rapid solidification on eutectic Si. The resulting eutectic microstructures are more isotropic in comparison to that of the base alloy affecting the mechanical properties of the alloys. The modification of Si morphology and supersaturation caused by the modifiers were investigated by microscopy, X-ray diffraction, and differential scanning calorimetry. Compared to melt-spun AlSi10Mg, the eutectic Si network is finer and less continuous when Er or Sr is added, and disrupted with rounded crystals dispersed in the matrix when adding nano-TiB2. The level of supersaturation decreases in the order Er–nano-TiB2–Sr. A transition from columnar Al grains at the wheel side to finer equiaxed grains at the air side was found in the unmodified ribbon and in the one containing nano-TiB2 by means of electron backscattered diffraction. The Er- and Sr-modified ribbons display equiaxed Al grains of constant size throughout their thickness. The average hardness obtained by nano-indentation tests was lower than that of AlSi10Mg. The less continuous Si network causes the hardness drop but provides more isotropic mechanical properties

Fracture behavior in Cu46.5Zr46.5Al7 and Cu46.5Zr41.5Al7Y5 bulk metallic glasses

The interplay between chemical composition, plastic behavior, and fracture modes of Cu46.5Zr46.5Al7 and Cu46.5Zr41.5Al7Y5 bulk metallic glasses (BMGs) was investigated by compression tests and fracture surfaces analyses. The aim was to explore the possibility of coupling physical, chemical, and hardness properties, with adequate macroscopic compressive plasticity. Cylindrical test samples, having a height-to-diameter ratio equal to 2, were machined and ground from as-cast bars and were tested in compression between lubricated plates, the displacement being measured by a clip-gage inserted between the plates. Y free BMG engineering stress-strain curves show a plastic behavior consisting of successive sudden stress drops and linear reloading segments. A detailed analysis of these features was performed to yield a correlation between the plastic deformation steps and the released elastic energy associated with each serratio

Sex- and age-related differences in the contribution of ultrasound-measured visceral and subcutaneous abdominal fat to fatty liver index in overweight and obese Caucasian adults

Differences in body fat distribution may be a reason for the sex-, age-, and ethnicity-related differences in the prevalence of fatty liver disease (FL). This study aimed to evaluate the sex- and age-related differences in the contribution of visceral (VAT) and subcutaneous (SAT) abdominal fat, measured by ultrasound, to fatty liver index (FLI) in a large sample of overweight and obese Caucasian adults, and to identify the VAT and SAT cut-off values predictive of high FL risk. A cross-sectional study on 8103 subjects was conducted. Anthropometrical measurements were taken and biochemical parameters measured. VAT and SAT were measured by ultrasonography. FLI was higher in men and increased with increasing age, VAT, and SAT. The sex*VAT, age*VAT, sex*SAT, and age*SAT interactions negatively contributed to FLI, indicating a lower VAT and SAT contribution to FLI in men and in the elderly for every 1 cm of increment. Because of this, sex- and age-specific cut-off values for VAT and SAT were estimated. In conclusion, abdominal adipose tissue depots are associated with FLI, but their contribution is sex- and age-dependent. Sex- and age-specific cut-off values of ultrasound-measured VAT and SAT are suggested, but they need to be validated in external populations